How To Install Programs Onto Usb Kali Linux
How To Install Program Onto Usb Drive
This section details how to install Junos OS softwareversion 15.1X53-D496.0 onto an NFX250 from a USB drive. Doing thissets the device to the factory default state. We also perform someconfirmation steps and obtain the device’s serial number. Thisprocedure is for an NFX250 device.
Before You BeginIn order for this procedure to succeed, you must have the following.Physical access to the USB port of the NFX device.A USB drive of at least 4GB containing the Junos OS Softwareimage, 15.1X53-D496.0, inserted into the USB port of the NFX.Access to the console port of the NFX device (This canbe physical access or access over a terminal server.).A DHCP server that is reachable from the ge-0/0/11 interface of the NFX250. This DHCP server must be able to provideIP address, name server, and default gateway to the NFX upon request. The jsxe0 interface has a number of logicalinterfaces used internally by the NFX for different purposes.
Youare looking for the jsxe0.0 logical interface. Confirmthat the DHCP server has provided an address in the proper range beforecontinuing. Root@jdm:# show interfaces jsxe0Logical interface jsxe0.1 (Index 4)Flags: UpInput packets: 0Output packets: 252Protocol inet, MTU: 1500Logical interface jsxe0.2 (Index 5)Flags: UpInput packets: 3Output packets: 274Protocol inet, MTU: 1500Logical interface jsxe0.0 (Index 3)Flags: UpInput packets: 7097Output packets: 8722Protocol inet, MTU: 1500Destination: 172.26.133.0/24, Local: 172.26.133.106,Broadcast: 172.26.133.255At this point, you can confirm that the DNS name server anddefault gateway are working by issuing the ping command to some hoston the Internet. Root@jdm: # cli root@jdm: ping www.juniper.net count 1 PING e1824.dscb.akamaiedge.net (23.223.165.73) 56(84) bytes of data.64 bytes from a23-223-165-73.deploy.static.akamaitechnologies.com (23.223.165.73): icmpseq=1 ttl=56 time=2.67 ms- e1824.dscb.akamaiedge.net ping statistics -1 packets transmitted, 1 received, 0% packet loss, time 0msrtt min/avg/max/mdev = 2.670/2.670/2.670/0.000 msThe last part of this procedure is to login to the Junos ControlPlane (jcp) in order to obtain the device serial number which willbe used later in the SD-WAN deployment. Root@jdm: ssh vjunos0 Last login: Tue Jan 22 06:- JUNOS 15.1X53-D40.3 Kernel 32-bit FLEX JNPR-10.1-20153fbsd-builderstable10At least one package installed on this device has limited support.Run 'file show /etc/notices/unsupported.txt' for details. Root@: #cli root show chassis hardware Hardware inventory:Item Version Part number Serial number DescriptionChassis DXXXXXXXXXX3Pseudo CB 0Routing Engine 0 BUILTIN BUILTIN RE-NFX250-S2FPC 0 REV 04 650-066113 DXXXXXXXXXX3CPU BUILTIN BUILTIN FPC CPUPIC 0 REV 04 BUILTIN BUILTIN 10x10/100/1000 Base-T-2x1G SFP-Power Supply 0Fan Tray 0 fan-ctrl-0 0, Front to Back Airflow - AFOFan Tray 1 fan-ctrl-0 1, Front to Back Airflow - AFOThe device serial number is listed on the Chassis line of the output. In this example, it is partly obscured for securitypurposes.
Make note of the serial number for later use.